Glass bottle wine filling line working system is important to know. Bottles driven by variable pitch screw are transferred to rinsing part through bottle-inlet star wheel. Nylon bottle holders nip the bottle necks and rotate 180°along a slideway to make the necks upside down. In certain area of rinsing part, the spraying nozzles spray water to rinse the internal surface of the bottles. After rinsing and dripping, bottles are rotated 180°again along a slideway to make the necks upward. Then bottles are transferred to filling part through the star wheel. Bottles will contact and lift the filling valves by bottle holder lifting device, thus filling passages are opened.
Wine filling bottle machine uses vibration type cap unscrambler. By vibrating, disordered caps will be transferred to the cap tunnel in a good order. The ordered caps will be transferred to the position above the bottle-inlet star wheel. By adjusting the position, cap picking and cap sleeving will start before bottles enter the capping part.
The cap pressing head will press the cap under the cam slideway. After cap pressing finishes, the pressing head will lift and the bottles will be transferred to the conveyor by bottle-outlet star wheel and go into the next process.
